Table of Contents
Advertisement
TLE493D-A2B6 MS2GO
3D Magnetic Sensor 2 Go evaluation kit
Software installation
Figure 20
7.
You can now start the evaluation software. Open the start menu, browse to Infineon Technologies > 3D
Sensor 2go Kit and open the application by clicking on 3D 2Go.
Figure 21
3.1
Driver installation
To enable the communication between the 3D Magnetic Sensor 2 Go kit it is necessary to install the J-Link driver
on your PC.
The driver is included in the GUI installer and will start automatically within the installation progress. In case of
issues, you can directly download the latest version from the SEGGER homepage:
https://www.segger.com/downloads/jlink
Steps
1.
Start the installation. Invoke your downloaded driver executable or wait for the 3D Magnetic Sensor 2 Go
installer to open the window shown in
User Manual
Installation finished
Shortcut to the 3D Magnetic 2Go evaluation software (GUI)
Figure
22. Click on Next.
16
1.2
2019-09-06
Advertisement
Table of Contents
