Hardware Extensions - Infineon 3D Magnetic Sensor 2 Go User Manual

TLE493D-A2B6 MS2GO
3D Magnetic Sensor 2 Go evaluation kit
Introduction
1.3

Hardware extensions

Additionally to the provided standalone magnet there are several dedicated extensions available that can be
mounted to the 3D Magnetic Sensor 2 Go kit.
Table 1 3D Magnetic Sensor 2 Go extensions
Type
Joystick
Rotation knob
Linear slider
Out of shaft
Figure 2 Joystick and rotation knob extensions for the 3D Magnetic Sensor 2 Go kit
Joystick
The magnet used in the joystick extension is an axial magnetized magnet as shown in
material is ferrite, of class Y35, which is equivalent to a remanence of between 400 mT and 410 mT. The magnet
disk has a size of 5 mm diameter and 5 mm thickness. For more information about the magnet, please follow
this link:
https://www.supermagnete.de/eng/disc-magnets-ferrite/disc-magnet-5mm-5mm_FE-S-05-05
User Manual
Orderable part number (OPN)
JOYSTICKFOR3D2GOKITTOBO1
ROTATEKNOB3D2GOKITTOBO1
LINEARSLIDER2GOTOBO1
OUTOFSHAFTFOR3D2GOTOBO1
4
Figure 3. The magnet
1.2
2019-09-06