Out Of Shaft - Infineon 3D Magnetic Sensor 2 Go User Manual

TLE493D-A2B6 MS2GO
3D Magnetic Sensor 2 Go evaluation kit
3D magnetic sensor evaluation
Figure 31 Linear movement view
4.6

Out of shaft

This view is meant to be used with the out of shaft extension. It allows to measure the angle of the magnet while
the sensor is placed at the side of it.
For details have a look on the video "3D magnetic sensor out of shaft adapter angle measurement" on the
following page:
https://www.infineon.com/cms/en/product/promopages/sensors-2go/#Add-ons-3D-Magnetic-2GO
User Manual 24 1.2
2019-09-06