Graph View - Infineon 3D Magnetic Sensor 2 Go User Manual

TLE493D-A2B6 MS2GO
3D Magnetic Sensor 2 Go evaluation kit
3D magnetic sensor evaluation
Table 4
Sensor mode
Master controlled
mode
4.2

Graph View

The graph view displays the magnetic field measurements in X, Y and Z direction.
Figure 28 shows the graph view window. On the left hand side there are three histograms which plot the
magnetic field for each measured sample. On the right a table displays all measured data, including the
temperature. With the save button it is possible to export the measurement data into a .csv file. This is
especially helpful for processing the data afterwards. .
If a new mode should to be evaluated click the Stop button on the left control panel. Save the data and Clear it.
Select a new configuration and click again on Start to begin the new evaluation.
Figure 28 Graph view
User Manual
Sensor modes (continued)
Description
Sensor measurements are triggered by the microcontroller, which
enables high flexibility.
21 1.2
2019-09-06