Table of Contents
Advertisement
Quick start guide for MERUS™ evaluation boards
EVAL_AUDIO_MA12070_B and EVAL_AUDIO_MA12070P_B
Quick start
Figure 3
Bridge-tied load (BTL) configuration with analog or digital audio inputs
2.2
Software installation
The following steps describe how to download and install the graphical user interface (GUI) software tool.
Open your web browser and download the USB control interface drivers from the following link. Press
1.
"setup executable" to download the automatic installer, as shown in
Figure 4
File download for USB control interface drivers
Run the downloaded file "CDM21228_Setup" and follow the instructions to install the driver. Do not
2.
connect the USB cable while the installation process is running.
Open your web browser and download the software from the corresponding evaluation board page:
3.
EVAL_AUDIO_MA12070_B
the executable file "MA120xx_GUI" of the GUI software. Scroll down and click "Download".
Figure 5
File download for GUI software
This concludes the software installation.
User manual
or EVAL_AUDIO_MA12070P_B. A compressed folder will be downloaded with
8
Figure
4.
V 1.0
2023-06-07
Advertisement
Table of Contents
