Download  Print this page

Configuration Tool; Configuration - Bosch Power DC plus 25kW Installation Manual

Wallbox charger
Hide thumbs

Advertisement

Table of Contents
en | 8 | Power DC
plus
25kW Wallbox Charger Installation Manual

6.1 Configuration Tool

6.1.1 System
`
System Serial Number (read only)
`
CSU Version (read only)
`
UI Version (read only)
`
SMR Version (read only)
`
SystemAliveTime – time elapsed since last system
power-on (read only)
`
Authentication Mode
Delta card (local authentication)
SMS authentication (remote authentication)
No authentication
OCPP authentication (suggested setting when
OCPP is in use)
`
MaxChargingPower – maximum output power
`
MaxChargingTime – maximum charging time per
session
`
MaxChargingEnergy – maximum charging energy per
session
`
Maximum Plug Insertions – When the count of plug
insertions reaches this value, a trap message will be
sent to the backend System Date and Time. Set
system date and time to ensure that system events
are recorded accurately.
6.1.2 OCPP Ethernet
`
OCPP local list – maximum charging time per ses-
sion
`
OCPP offline policy – maximum charging energy per
session
`
OCPP charge box ID
`
OCPP charge point model
`
OCPP server URL
579604 | REV. A | 12.12.2016
6.1.3 Communication
`
TFTP Server Address – for firmware upgrade
`
SNMP Trap Receiver – Trap receiver IP address
`
SNMP port –
`
Trap port – s
`
SNTP Server – Time server (for future use)
`
Wireless mode
`
Nobil Socket ID
6.1.4 Ethernet
`
LAN DHCP – On for DHCP; Off for static IP address
`
LAN IP Address, submask, gateway – in accordance
with local network settings
6.1.5 3G
`
3G Network Operator – for future use
`
3G APN – mandatory for 3G connection
`
VPN Server IP – mandatory for setting up a VPN
connection
`
VPN Name – VPN login name, mandatory for setting
up a VPN connection
`
VPN Pwd – VPN password (optional)
`
VPN Psk – VPN preshared key (optional)
6.1.6 WLAN (not currently supported
`
WiFi DHCP – On for DHCP; Off for static IP address
(for future use)
`
WiFi IP Address, submask, gateway – in accordance
with local network settings (for future use)
`
WiFi Security Type (for future use)
`
Security Key – in accordance with security type (for
future use)
`
WiFi SSID – SSID of WiFi Access Point for connection
(for future use)
6.1.7 Language
Set the languages charger used to display text in the user
interface. The charger can be configured for up to four
different languages. Each language will be represented
with a selection button on the Welcome page. When the
user selects a preferred language on the Welcome page,
all texts of user interface will be displayed in the selected
language.
6.2 3G Configuration
For models equipped with the 3G modem, insert a valid
3G SIM card (see previous steps) to start the 3G connec-
tion. Consult with local operator to activate data service
on the SIM card beforehand. Disable PIN check on the
SIM card before inserting the card to the modem. Request
APN information from operator and make sure the APN is
correctly set via the Configuration Tool.
Bosch Automotive Service Solutions Inc.

Advertisement

Table of Contents
loading