CE approval The USB CM-Hub has been tested according to the regulatory requirements of the European Union (EU) in accordance with the 2014/30/EU standard, and meets all the requirements for the CE label.
Do not exceed the maximum length of the device‘s supply cables. Ensure that the device‘s supply cables are pro- tected against sharp edges. Only use suitable screws and washers for mounting the device. Robert Bosch GmbH 7 620 200 073 | 09.2020...
4 | en Device drawings Device drawings 7 620 200 073 | 09.2020 Robert Bosch GmbH...
Page 5
Pin definition with cable 7 620 280 127 (Cable not included in delivery) IN (VBAT) The USB CM-Hub documentation consists of: - 7620 200 073 Technical customer documentation (TCD) - User Manual (this document) - TCD drawing Together, all documents form the complete product documentation. Please note that all documented regulations and constrains have to be complied with when installing this product into coaches.
Need help?
Do you have a question about the USB CM-Hub and is the answer not in the manual?
Questions and answers