Table of Contents
Advertisement
Module installation and connection
Installing a PCMCIA card in the SF/CPU module
Install a PCMCIA card to provide file storage capacity.
1. For the 8393 or 8394 SF/CPU module, position the card with the label facing up and
2. Insert the card into the card receptacle.
3. Gently push in the card until it fits snugly in place.
4. To remove a PCMCIA card, press the eject button and remove the card.
Protecting PCMCIA card files
You can write-protect the PCMCIA card so that important files are not overwritten, or remove
the protection to write files to the card.
1. Remove the memory card from the SF/CPU module.
60
Installation — Modules
•
Connecting a network management station to the SF/CPU
•
Job aid: Required connectors and cables
the insert arrow pointing toward the card receptacle.
Electrostatic alert:
Risk of data loss
on page 62
on page 64
May 2011
Advertisement
Table of Contents
