8348Tx Module - Avaya Ethernet Routing Switch 8300 Installation Manual

Ethernet Routing Switch 8300 module fundamentals
Type
Module
For information about the 8348GTX-PWR module power consumption and how to calculate
available system power, see Avaya Ethernet Routing Switch 8300 Planning and Engineering
— Power Considerations, NN46200-511 or Avaya Installation — AC Power Supply,
NN46200-301 and Avaya Ethernet Routing Switch 8300 Installation — DC Power Supply,
NN46200-310. For instructions to configure PoE, see Avaya Configuration — Power over
Ethernet, NN46200-512.

8348TX module

The 8348TX module provides 48 autonegotiating 10/100 Mbit/s ports.
The following figure shows the 8348TX module.
38 Installation — Modules
Label
Online Green/Steady
Amber/Steady
PSE Green/Steady
Green and Amber
Steady
Amber/Steady
Off
Color/State
The module completed
hardware and software
initialization and is operating
normally.
The module is booting and
initializing the hardware. If the
condition persists, the steady
amber light indicates that the
module failed the initialization
self-test.
48 Volt (V) is good
PoE passes initialization
PoE administration is enabled
PoE is operating normally.
PoE is upgrading firmware.
Due to 48 V PoE power loss or
PoE initialization failure,
software has disabled PoE
administration.
PoE is booting, or PoE admin
is disabled.
Meaning
May 2011