8348Gb Module - Avaya Ethernet Routing Switch 8300 Installation Manual

Ethernet Routing Switch 8300 module fundamentals
Type
Module

8348GB module

The 8348GB module supports standards-based 1000 Mbit/s. Avaya has approved the SFP
transceivers for use in 8348GB module.
The 8348GB module provides 48 1000BASE-X (SFP) ports. You can use the ports on the SFPs
to make riser connections, server attachments, or interswitch links.
The following figure shows the location of the 8348GB module LEDs.
28 Installation — Modules
Label Color/State
Amber/Blinking
Off
RX Green/Steady
Amber/Steady
Green/Blinking
Amber/Blinking
Off
Online Green/Steady
Amber/Steady
Off
Meaning
The port is transmitting data with
error.
The port is disabled.
The port established a link and is
enabled.
The cable is disconnected, the port
is disabled, or the link is down.
The port is receiving data.
The port is receiving data with error.
The port is disabled.
The module completed hardware
and software initialization and is
operating normally.
The module is booting and initializing
the hardware. If the condition
persists, the steady amber light
indicates that the module failed the
initialization self-test.
The switch power is off. This
condition can also indicate that the
module is not receiving sufficient
power from the switch (for example,
a card fault exists or the card is not
fully plugged in).
May 2011