Table of Contents
Advertisement
Ethernet Routing Switch 8300 module fundamentals
Type
8324FX module
The 8324FX module provides 24 100BASE-FX ports using MT-RJ connectors. The module is
nonblocking. Each 100BASE-FX port can operate in half- or full-duplex mode. The optical
transceivers provide transmission ranges up to 6562 ft (2 km) using 62.5 µm multimode fiber
cable or 4264 ft (1.3 km) using 50 µm multimode fiber cable.
Warning:
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look
into an optical fiber or connector port. Always assume that fiber optic cables are connected
to a light source.
The following figure shows the 8324FX module LEDs.
32
Installation — Modules
Label
Amber/Steady
Off
Color/State
initialization and is
operating normally.
The module is booting
and initializing the
hardware. If the
condition persists, the
steady amber light
indicates that the
module failed the
initialization self-test.
The switch power is off.
This condition can also
indicate that the switch
does not have sufficient
power for the module (for
example, a card fault
exists, or the card is not
fully plugged in).
Meaning
May 2011
Advertisement
Table of Contents
