Battery Memory Set And Call Out - Skyrc T100 Instruction Manual

The charger can store up to 10 different charge profiles for your convenience, and the
stored profiles can be recalled quickly without having to go through the setup process.
When you are willing to alter the parameter value in the program, press START/ENTER
to make it blink then change the value with INC or DEC. The value will be stored by
pressing START/ENTER once.
Note: All following screen are taking 2S(7.4V) LiPo battery for example.
[ B A T T M E M O R Y 1 ]
E N T E R S E T - >
START/ENTER
B A T T T Y P E
L i P o
DEC INC
B A T T V O L T S
7 . 4 V ( 2 S )
DEC INC
C H A R G E C U R R E N T
4 . 9 A
DEC INC
T V C = Y O U R R I S K
4 . 2 0 V
DEC INC
S A V E P R O G R A M
E N T E R
START/ENTER
T100

BATTERY MEMORY SET AND CALL OUT

1. Battery Memory Set
Enter the battery memory program.
(10 different charge profiles can be stored).
Set the battery type(LiPo/LiHV/LiFe/LiIon/NiMH/NiCd/Pb).
Set the voltage and number of cells(2S-4S).
Set the charge current(0.1-6.0A).
Set the terminal voltage(4.18-4.25V).
Press ENTER to save program.
19 ·