Hilti DX 9-ENP Original Operating Instructions page 30

Hide thumbs Also See for DX 9-ENP:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 25
Information shown in the middle of the display
Display
Information shown in the lower part of the display
Display
3.7
Items supplied
Fastening tool, toolbox, cleaning set, scraper, ramrod, Hilti lubricant spray, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
22
English
Explanation
The tool temperature is shown in the middle of the display.
In this case the tool temperature is within the normal range.
The temperature of the tool is high. Reduce the fastener driving rate so
that the temperature can return to the middle of the range.
ATTENTION:
The cartridge strips and the nail strips must be removed from the tool
immediately if use of the tool is interrupted while a warning symbol is
displayed.
The temperature of the tool is extremely high. A warning symbol
indicates that the cartridges can fire prematurely and the plastic nail
strips can melt if the cartridge strip or the nail strips do not move
while they are inside the tool. We therefore recommend that the
tool continues to be used, but at a lower fastening rate, so that the
temperature of the tool can return to normal.
ATTENTION:
The cartridge strips and the nail strips must be removed from the tool
immediately if use of the tool is interrupted while a warning symbol is
displayed.
Explanation
At the lower left edge, a bar showing 1 to 7 segments indicates the
interval until the tool needs to be cleaned again.
In this case, cleaning will not be necessary for some time.
The 7 segments shown indicate that cleaning will be necessary
shortly.
The max. number of fasteners driven has been reached. The tool must
be cleaned.
The black square at the lower edge on the right indicates that demo
mode is active. In this case, the information in the display does not
reflect the actual status of the tool.
The Hilti Connect smartphone app can be used to deactivate the
demo mode. Demo mode is automatically deactivated after a period of
15 minutes.
2241307
*2241307*

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents