Hilti DX 9-ENP Original Operating Instructions page 26

1.3 Product-dependent symbols
1.3.1 Symbols on the product
The following symbols are used on the product:
Warning: hot surface
1.3.2 "Must do" symbols
The following "must do" symbols are used on the product:
Wear protective gloves
General symbol for "must do"
Read the operating instructions
Wear a hard hat
Wear eye protection
Wear ear protection
1.4 Declaration of conformity
We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
1.5 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Direct fastening tool
Generation
Serial no.
2 Safety
2.1 Safety instructions
This documentation contains important instructions on how to use the fastening tool safely and correctly.
You can avoid residual hazards through observance and practical implementation of the safety instructions
found in this documentation and on the product.
2.1.1 Basic safety precautions
In addition to the safety instructions given in the various sections of these operating instructions, the following
points must be strictly observed at all times.
Using cartridges
Use of cartridges of inferior quality in Hilti tools may lead to a build-up of unburned powder, which may
suddenly explode and cause severe injuries to operators and bystanders. The cartridges must be verifiably
18 English
DX 9–ENP
01
2241307
*2241307*