Table of Contents
Advertisement
VRC 6940 Product Reference Guide
Rate Control
To configure the Rate Control:
1. Select Rate Control to display the screen shown in
2. Use the UP or DOWN arrow keys to select
options, then press ENTER. For Spring protocol,
RATE CONTROL
TX Rate:
1 MB only
BkSp, CLR, Enter
Scanner/RF Operation
To configure the Scanner/RF operation:
1. Select Scan/RF Op to display the screen shown in
2. Use the UP or DOWN arrow keys to select
press ENTER.
If you want an attached scanner and the radio to both operate at the same time, select
Concurrent Op. If you want radio operation to be suspended during a scan, select
Scan stops RF.
SCAN/RF OP
Select Op Mode:
Concurrent Op
BkSp, CLR, Enter
A-20
Figure A-24. Setting the Rate Control
Figure A-25. Setting Scanner/RF Operation
Figure
A-24.
1Mb only, 2Mb only, or 1Mb and 2 Mb
is the only choice.
1Mb
Figure
A-24.
or
Concurrent Op
Scan stops RF
. Then
Advertisement
Table of Contents
