Table of Contents
Advertisement
C:\>rcvhex memory.txt 38.4 1
RCVHEX
Filename to receive data
Command
(you can make one up)
Figure 6-2. Setting up to Receive a Memory Transfer
4. Boot the VRC 6940 to Command Mode:
a. Press and hold the A and D keys.
b. Press and release the ON/OFF key.
c. Release the A and D keys.
d. The terminal boots to the function selector screen in Command Mode, as shown
in
Figure
COMMAND MODE
Select Function
Self Test
5. When the Memory Transfer option appears, press ENTER.
6. The systems displays this message:
Checking Memory
Please Wait
Baud Rate
6-3. Press UP or DOWN arrows to scroll through the options.
Figure 6-3. Command Mode Screen
COM Port
Troubleshooting
6-9
Advertisement
Table of Contents
