Symbol VRC 6940 Product Reference Manual page 55

VRC 6940 Product Reference Guide
7. Select a range of RAM to transfer. Press the UP and DOWN arrows to select an
option (All, Range or None) and press ENTER. If you select All, the program
skips to the summary screen. Continue at step 10.
RAM
Select Option
All
Figure 6-4. Selecting a Range of Memory to Transfer
8. Specify a range of RAM by setting Start and End addresses. Use LEFT and RIGHT
arrow keys to move the cursor to a digit that you want to set. Use UP and DOWN
arrow keys to change the value. When the correct range appears, press ENTER.
RAM
Use arrow keys
Start End
00000 9FFFF
Figure 6-5. Selecting a Range of RAM to Transfer
9. Specify a range of NVM to transfer. Use the arrow keys to select All or None, and
then press ENTER.
NVM
Select Option
All
Figure 6-6. Selecting a Range of NVM to Transfer
6-10