Table of Contents
Advertisement
VRC 6940 Product Reference Guide
Directory
E:\
TDREM.EXE
(cont'd)
FLASH.BAT
RAMINIT.EXE
RAMCHG.EXE
RF_VER.COM
RFOFF.COM
UPD802
(sub-directory)
TFTPC.COM
TFTP.EXE
TFTP.MSG
LWP.MSG
BGET.BAT
B-6
Table B-2. VRC 6940: Software Files
File Name
Remote end of serial link used to transfer files to and
from a terminal. Used mainly during development but
also a useful diagnostic tool.
A flash utility for copying, renaming or deleting files
from flash memory. Useful in development for
transferring single files to flash disk. See
more information.
Copies _AP.BAT to new RAM disk. The _AP.BAT is
saved by a previous RAMCHG. The _AP.BAT must
be smaller than 120 bytes.
Changes the RAM disk size and warm boots the
terminal. RAMCHGnn changes the RAM disk to
nnKBytes.
Radio utility file.
Used for batch application to unconditionally turn off
the radio adapter to conserve battery life.
Stores files to update radio to become 802.11
compatible.
Encapsulation for TFTP.EXE to allow trapping of
error messages. This allows the re-trying of a file
transfer if an error is found.
Trivial File Transfer Protocol software.
TFTP message file.
TCP/IP message file.
Batch file for doing TFTP file transfers from a server
to the flash disk. If the file already exists on the
current directory on the flash disk (normally the
current application's home directory), the file is not
transferred. BGET.BAT calls FGET.BAT to perform the
actual transfer.
Description
page A-21
for
Advertisement
Table of Contents
