Table of Contents
Advertisement
Directory
E:\
APPINIT.COM
(cont'd)
CBT.COM
WBT.COM
WAIT.EXE
GETSTR.EXE
LSL.COM
DIAG24.EXE
CFG24.EXE
BOOTP
TCPIP.EXE
PIPCT.EXE
SS.BAT
Table B-2. VRC 6940: Software Files
File Name
Scans the flash disk for valid applications. If it finds
more than one, it displays an application selection
menu. A valid RF application has a home directory in
the flash disk's root directory containing a file called
RUN.BAT. This is how the system knows which
applications are present, and which are batch
applications.
Utility to re-initialize (cold boot) the terminal.
Utility to re-initialize (warm boot) the application.
A command used in batch files to pause the display
for a specified number of seconds. The pause can be
interrupted with the CTRL-FUNC-1 key sequence. If
interrupted, the command returns an errorlevel 1.
Prompts for keyboard input, which is placed as a
character string in the environment variable _STR.
Used to customize utility files for building an
application HEX during developer kit installation.
Novell's Netware Link Support Layer software. Used
to access the physical network, in this case a PCMCIA
radio card.
A diagnostic ping utility for diagnosing possible radio
problems. See
A utility for configuring Spectrum24 radio
parameters. See
A utility that requests and receives an IP address and
sets up communications parameters for use by other
parts of the system. It runs automatically during start-
up. Do not run it from a DOS prompt.
Novell's Lan Workplace stack version 5.0.
Used to save and restore part of the BIOS work area
overwritten when TCPIP.EXE is loaded.
Batch file to run DIAG24 for site survey purposes.
Software Environment
Description
page A-5
for more information.
page A-12
for more information.
B-5
Advertisement
Table of Contents
