SUBNET MASK
Enter SN Mask:
255.255.255.0
BkSp, CLR, Enter
Default Router
The Default Router address is the node address that receives all packets destined for remote
networks. To configure the Default Router:
1. Select Default Router to display the screen shown in
2. Erase all or part of the entry.
3. Type an IP address in decimal using the ddd.ddd.ddd.ddd format.
4. Press CLEAR or ENTER to return to the main menu.
DEFAULT ROUTER
Enter D Router:
0.0.0.0
BkSp, CLR, Enter
Figure A-15. Setting a Subnet Mask
Figure A-16. Setting a Default Router
Utilities and Diagnostic Tests
Figure
A-16.
A-15