Table of Contents
Advertisement
Table 2. DD6900 system with ES40 racking locations
Component
Controller location with ES40
shelves
FS25 location with ES40 shelves
ES40 locations
Table 3. DD6900 system with DS60 racking locations
Component
Controller location with DS60
shelves
FS25 location with DS60 shelves
DS60 locations
Identifying the rail kit components
The 2U sliding rail assemblies allow the server to be secured in the cabinet, and extended from the cabinet so that the system
cover can be removed to access the internal FRUs.
Figure 6. Sliding rail assembly - 2U systems
1. Sliding rail (2)
2. Velcro strap (2)
3. Screw (4)
4. Washer (4)
The rails are compatible with racks with square holes, unthreaded round holes, and threaded round holes.
The rail kit also includes a unique cable management arm (CMA) bracket assembly that consists of inner and outer brackets, and
screws to attach the brackets to the rails.
Configuration
Single node or high-availability (HA) primary node
HA standby node
HA
Single node or HA
Configuration
Single node or HA primary node
HA standby node
HA
Single node or HA
Rack location
U13-U14
U16-U17
U31-U32
U01-U12, U19-30
Rack location
U12-U13
U15-U16
U18-U19
U02-U11
Install the System in the Rack
17
Advertisement
Table of Contents
