Cleaning - Bartscher 150159 Manual

6. Cleaning

WARNING!
Before cleaning disconnect the device from the power
supply (pull the plug!).
Do not use pressurized water jest for cleaning!
Protect the device from the water penetration.
o Clean the device after each use.
o Remove the mixing beaker with the lid from the motor block, empty the beaker when
required.
o Wash the plug, lid, and mixing beaker in the running water with the gentle washing
agent and plastic brush. Maintain special caution during washing the mixing beaker:
the knife installed in the bottom is very sharp. There is the injury hazard!
o Rinse the washed elements in clean water and dry thoroughly with cloth or leave for
drying before the next use.
CAUTION!
Never immerse the motor block in water or other liquids, do not wash it in the
running water or dishwasher.
o Wipe the motor block and the supply cable with soft, moistened cloth. Protect the
device and the plug from the water penetration. Dry the device thoroughly with soft,
dry cloth.
o Always use the soft cloth only, never use any abrasive cleaning agents which may
damage the device surfaces.
Storing of the device
o If the device is not used for a longer time, clean it according to the instructions above
and store it in dry, clean place, protected from cold, sunlight, and children. Do not place
any heavy objects on the device.
- 34 -