Cleaning - Bartscher 150151 Manual

•
Do not process too much of hard or frozen products in one batch. For better results
process them in smaller amount.
•
When the knife is blocked and the motor operates irregularly stop the device at
once, pull the plug from the socket, and remove some ingredients from the
blending tumbler. Then continue the blending process.
WARNING! Injury hazard!
Never place your hands or any objects in the blending tumbler during the device
operation!
Never use any auxiliary means for pressing the ingredients during the device
operation. They may be caught by the knife and cause the operator's injuries or
the damages!
•
When the required consistence of the ingredients is obtained stop the device (press
the ON/OFF button) and disconnect the blending tumbler from the motor block by
rotating it counterclockwise. Empty the tumbler through the spout.
•
After use disconnect the device from the socket (pull the plug!).

6. Cleaning

CAUTION!
Disconnect the unit from the power supply (unplug!) before cleaning.
The unit is not designed to be rinsed with running water.
Do not use a pressure washer to clean the device!
Be careful and do not let the water into the unit.
o Clean the device thoroughly after each use.
o Disconnect the tumbler from the motor block by rotating it counterclockwise. Release
the lid clamps and remove the lid. Empty the blending tumbler.
o Wash the lid and tumbler in the running water with the gentle washing agent and
plastic brush. Maintain special caution during washing the tumbler: the knife installed
in the bottom is very sharp. There is the injury hazard!
o Then rinse the washed parts in clean water and leave them for drying or dry the
thoroughly with the cloth; then they may be reinstalled in the device.
- 30 -