Protective devices
Protective function
That functions allows the motor to be started only with installed mixing beaker lid.
That protection consists of magnet in the lid and inductive proximity switch at the pipe
next to the mixing beaker.
Overload/overheating protection
RESET
button
5. Installation and operation
5.1 Installation
Positioning
Unpack the device and remove all package materials according to the valid
environment protection regulations.
CAUTION!
Never remove the rating plate or any warning signs from the device.
Place the device on top of an even, stable, and water-resistant surface which
supports the weight of the device and is not heat sensitive.
Never place the device on the flammable surfaces.
Never put the device at the edge of a table to avoid accidents.
- 30 -
That protection is activated automatically in
case of motor overheating due too long
operation or overloading. Wait until the
device cools down, then remove the mixing
beaker and press RESET button at the
device bottom (see fig. on the left).
Then the device may be started again.