Table of Contents
Advertisement
WARNING! Risk of burns!
Do not process liquids or food products of
temperature above 80 °C in the mixing beaker.
Before putting the mixing beaker on the motor block make sure that the device is not
connected to the socket.
CAUTION!
In order to protect the device from damages the mixing beaker must be
inserted and removed from the motor block only when the device is turned off.
Put the lid on the mixing beaker so the magnet activates the proximity switch. The
device must be turned on only with correctly placed lid and correctly installed mixing
beaker. Before starting the device close the lid with the transparent plug (see below).
Connect the device to the single grounded socket.
Start the device by switching the ON/OFF switch to position "I"
Use the speed controller to select the desired speed in rnage from "MIN" to "MAX".
Rotate the controller clockwise to increase speed or anti-clockwise to reduce it.
The device processes the ingredients very quickly. Observe the mixing process.
Turn the device off and check consistence of mixed ingredients. When required
restart the device after cooling down.
Information: Hold the beaker firmly by the handle during mixing.
- 32 -
.
Advertisement
Table of Contents
