Operation - Bartscher 150159 Manual


The surface where the unit is installed must be easily accessible and large. In
order to assure comfortable operation and proper air circulation leave at least
15 cm of space on the sides and back and 50 cm on the front and top from the
walls, cabinets, etc.

Never put the device in a wet or moist environment.

Do not put the device near open flame, electric ovens, heaters or other heat sources.

Position the device in such way that the plug is easily accessible for quick
disconnecting when required.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
Connect the device only to properly installed single
socket with protective terminal.

The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.

5.2 Operation


Prior to the first use clean the device and its components according to the
instructions included in section 6 "Cleaning".

Place the motor block on the even, stable, and dry surface.

Prepare the food products for blending and put them in the beaker. Pay attention to
the filling marks placed on the mixing beaker.

The operational volume of the mixing beaker up to "MAX" mark is 2000 ml.

Do not overfill the mixing beaker. During processing of hot or foaming products and
during work at high speed fill the mixing beaker only up to 2/3 of the maximum
operating volume of 2000 ml.
- 31 -