Table of Contents
Advertisement
After each mixing wait for the device to cool down in order to prevent overheating
due to too long operation.
When the ingredients are supposed to be mixed shortly, use the PULSE function
with the appropriate button. That function makes the motor operating at the
maximum speed when the button is pressed.
The ingredients may be added through the opening in the lid when required.
To do this, remove the transparent plug from the lid.
When required the ingredients may be pushed towards the knife with use of
supplied pusher. It is designed in such way that it does not touch the knife at the
beaker bottom.
Close the lid again with the plug.
Do not process too much of solid or hard products in one batch.
For better results process them in smaller amounts.
When the knife is blocked and the motor operates irregularly stop the device at
once, pull the plug from the socket, and remove some ingredients from the mixing
beaker. To continue mixing press ON/OFF button.
WARNING! Injury hazard!
Never put your hands or any objects in the lid opening
when the motor is on! They may be caught by the knife
and cause the operator's injuries or the damages of the
device! First turn the device off and wait for the motor to
stop completely.
After obtaining the desired consistency of the ingredients turn the device off
(ON/OFF switch in position "O"), wait for the motor stop, and remove the beaker
from the motor block. Empty the mixing beaker.
After use disconnect the device from the socket (pull the plug!).
- 33 -
Advertisement
Table of Contents
