Certification; Important Notice; Product Declaration Of Conformity - Pyronix PCX-256 Installation Manual

Hide thumbs Also See for PCX-256:
Table of Contents

Advertisement

7 . 5 C e r t i f i c a t i o n
This product complies with all requirements of the European 'R&TTE Directive' 1999/5/EC for
connection to the PSTN. It is approved for use throughout the EU, see 'Declaration of Conformity'
on next page.
This equipment is thus suitable for single terminal connection to the public switched telephone
network (PSTN) throughout Europe. However, due to the differences between the individual
PSTNs provided in different countries - and even within a country - the approval does not, of itself,
give an unconditional assurance of successful operation on every PSTN network, or compatibility
with every possible ring cadence.
When using the COM9600 on ADSL lines, ADSL filters must be fitted. If ADSL
filters are used they should be fitted at the telephone line socket.
Should any difficulties be experienced, or it is required to use the unit on another network, please
contact your supplier in the first instance.

7.5.1 IMPORTANT NOTICE

The Declaration of Conformity to European R&TTE Directive for this product is valid ONLY when it
is correctly installed as described in these instructions.
These instructions are designed to ensure that SAFETY regulations are met, as well as functional
and programming aspects. It is therefore essential that these are followed exactly; in particular the
telephone cable must be routed and connected correctly.
The product declaration is for use with the following services ONLY:
The declaration will be void if used for any other purpose.
The Declaration of Conformity for this product for attachment to the PSTN is void if it is subject to
any unauthorised modification, or if used with, or connected to:
Internal software which has not been approved
External control software or control equipment which causes the unit to contravene the
requirements of telecommunications standards

7.5.2 Product Declaration of Conformity

Manufacturer
Details of Equipment
Declaration
EMC Directive 89/336/EC as
amended by 92/31/EC
Low Voltage Directive 73/23/EC
as amended by 93/68/EC
R&TTE Directive 1995/5/EC
RINS869-8
P C X 2 5 6 I N S T A L L A T I O N M A N U A L
Multi-Frequency signalling
Auto-Calling
Auto-Clearing
Pyronix
COM9600 Security Communicator/Modem
Under our sole responsibility, we hereby declare that the
product detailed above conforms with the essential
requirements of the directives identified below, having been
tested in accordance with the standards mentioned:
EN.50130-4 for Immunity
EN.50081 Part 1 for Emmissions
EN.60950
CTR.21
Page: 27

Advertisement

Table of Contents
loading

Table of Contents