Chapter 15: Engineer Contacts And Tables; Engineer Information; Certification - Pyronix Enforcer User Manual

C H A P T E R 1 5 : E N G I N E E R C O N T A C T S A N D T A B L E S

15.1 Engineer Information

Alarm Company
Date of Installation
Site Reference
Engineer Name
Engineer Contact Number
Installed to Grade
Environmental Class
Your panel is suitable for use in installations designed to meet the European requirements of
Security Grade 2, Environmental Class 2. When all parts are working normally, this equipment
in combination with the PSTN and suitable ARC equipment will meet the requirements of ATS2.
External arm/disarm readers meet the requirements of environmental class 4.
Your panel is designed to automatically inhibit certain functionality. The factory default
settings are shown below:
Intruder Alarm
Signal
Tamper Alarm
Signal
Keypad
Tag Reader (or
Tag at a
keypad)
* This figure is programmable by the Engineer.
Number of Code Differs: tag hex code.

15.2 Certification

All Wireless devices comply with the following EU requirements:
EMC Directive
Low Voltage Directive
R&TTE Directive
And meet the following standards where relevant:
EN 61000-6-3:2001
EN 50130-4:1996 +A1
EN 60950-1:2006
EN 50131-5-3:2005
ETSI EN 301489-3:2000
ETSI EN 300 220
CEPT/ERC
Compliant operation is only guaranteed when installed and operated according to the relevant
installation and user manuals.
II
After 3* unconfirmed alarms in the same area or 1 confirmed
alarm.
After 3* unconfirmed alarms in the same area or 1 confirmed
alarm.
After 30 key presses without entering a valid code, keys are disabled
for 90 seconds. After reinstatement, this will be repeated after each 7
key presses until a valid code is entered.
After 6 presentations of an invalid tag, the reader will be disabled for
90 seconds. After reinstatement, this will be repeated for each invalid
tag until a valid tag is used.
2004/108/EC
2006/95/EC
1999/5/EC
EMC. Generic emission standard. Residential, commercial and light
Immunity requirements for components of fire, intruder and social
Information technology equipment. Safety. General requirements
Grade 2. Interconnections for equipment using radio frequency
EMC. Radio equipment. Part 3: Short range devices (SRD) 9kHz to
40GHz
EMC. Receiver Class 1, Environmental Category 1
Recommendation 70-03 Annex 1
Page: 26