Request To Exit Button And Door Monitoring Connections - Pyronix PCX-256 Installation Manual

P C X 2 5 6 I N S T A L L A T I O N M A N U A L
Alarm Output
Relay capable of switching up to 50 volts, and up to 10 amps. This may be used to switch the
internal supply, or any suitable external supply, including AC voltages.

10.13.5 Request to Exit button and Door Monitoring Connections

If an electromagnetic lock or solenoid bolt is used, an RTE device (exit button) is required to permit
exit. This is activated when a normally open push button is momentarily closed.
The door monitoring facility may use a switch contact on a monitored door release, but a separate
security door contact is recommended.
NOTE: Each Door Station has these connections available.
RINS869-8 Page: 57