Processor And Chipset Overview; Special Features - Supermicro C9X299 User Manual

1.2 Processor and Chipset Overview

The C9X299-PG300F supports an Intel Core X-Series processor in the LGA2066 socket. With
the Intel X299 PCH, the C9X299-PG300F is a high-end, multi-GPU motherboard that offers
reliability and stability. It offers the latest high-performance features such as NVMe, M.2/U.2
storage interfaces, and DDR4 memory with speeds of up to 4000MHz (OC).
The C9X299-PG300F supports the following features:
•
ACPI Power Management Logic Support Rev. 4.0a
•
Intel Turbo Boost Technology
•
Configurable TDP (cTDP) and Lower-Power Mode
•
Adaptive Thermal Management/Monitoring
•
PCI-E 3.0, SATA 3.0, NVMe, U.2 and M.2 connectors
•
System Management Bus (SMBus) Specification Version 2.0
•
Intel Trusted Execution Technology (Intel TXT)
•
Intel Rapid Storage Technology
•
Intel Virtualization Technology for Directed I/O (Intel VT-d)

1.3 Special Features

This section describes the health monitoring features of the C9X299-PG300F motherboard.
The motherboard has an onboard System Hardware Monitor chip that supports system health
monitoring.
Recovery from AC Power Loss
The Basic I/O System (BIOS) provides a setting that determines how the system will respond
when AC power is lost and then restored to the system. You can choose for the system to
remain powered off (in which case you must press the power switch to turn it back on), or
for it to automatically return to the power-on state. See the Advanced BIOS Setup section
for this setting. The default setting is Last State.
17
Chapter 1: Introduction