Superdoctor® 5; B.2 Superdoctor® 5 - Supermicro C9X299 User Manual

Note 2: When making a storage driver disk by booting into a driver CD, please set the
SATA configuration to Compatible Mode, and configure the SATA as IDE in the BIOS
setup. After making the driver disk, be sure to change the SATA settings back to your
original settings.
B.2 SuperDoctor® 5
The Supermicro SuperDoctor 5 is a hardware monitoring program that functions in a
command-line or web-based interface in Windows and Linux operating systems. The program
monitors system health information, such as CPU temperature, system voltages, system
power consumption, and fan speed, and provides alerts via email or the Simple Network
Management Protocol (SNMP).
SuperDoctor 5 comes in local and remote management versions and can be used with
Nagios to maximize your system monitoring needs. With the SuperDoctor 5 Management
Server (SSM Server), you can remotely control the power status and reset chassis intrusion
for multiple systems with SuperDoctor 5 or IPMI. SD5 Management Server monitors HTTP
and SMTP services to optimize the efficiency of your operation.
Note: The default username and password for SuperDoctor 5 is ADMIN/ADMIN.
Figure B-2. SuperDoctor 5 Interface Display Screen (Health Information)
Note: The SuperDoctor 5 program and user's manual can be downloaded from the
Supermicro website at http://www.supermicro.com/products/nfo/sms_sd5.cfm.
113
Appendix B: Software Installation