Agilent Technologies E6000C User Manual page 114

How to Add a Reflective Event
N O T E
Position first level marker
Position second level marker
E6000C Mini-OTDR User's Guide, E0302
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
4 Sample Sessions: Analyzing an Existing Trace
4 Cursor left to Zoom, and press S
You now see a message saying Add Reflective
Event change the zoom.
5 Use your Cursor to change the zoom as required.
See "Zooming" on page 49.
6 When the zooming is as you want it, press S
continue.
You exit zoom directly into Marker mode. This is the mode
that you enter when you select Marker from the message
box.
How to adjust the level-markers.
7 If you are not already in marker mode, cursor to
Marker, and press S
ELECT
You see a message in the box above the trace telling you
to adjust the level-markers.
You adjust the level-markers by moving the position of
the current marker (marker A or marker B).
8 Use your L
and R
EFT IGHT
marker (marker A or marker B) to the Event.
9 Press U to acknowledge the marker position.
P
The first level-marker is now highlighted.
10 Use your L
cursor to move the first level-marker as
EFT
far left as you can.
11 Press Up to acknowledge the position of the first level-
marker.
The second level-marker is now highlighted.
.
ELECT
ELECT
.
cursors to move the current
to
113