3 Sample Sessions: Measuring a Trace
Figure 26 The Event Table
Contents of Event Table
N O TE
90
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
For each event in the table, you can see the type of the
event and its location. You also see the following
measurement results:
• The reflectance of the event.
• The insertion loss of the event.
• The attenuation between this event and the next one.
• The cumulative loss, that is the sum of the splice,
reflectance, and attenuation loss up to the point of the
current event.
If you activate [V
]<S
IEW
NAP
and down the Event Table, the highlighted marker moves
to the highlighted event.
In the Event Table, you see a box around the Event
nearest to the highlighted marker (if not in Snap to Event.
If <S
E
> is active, the maker is inverted).
NAP TO
VENT
E6000C Mini-OTDR User's Guide, E0302
How to Use the Event Table
T
E
>, as you cursor up
O
VENT