Agilent Technologies E6000C User Manual page 62

The File Utilities screen
N O T E
Select device
N O T E
Format device
W A R N IN G
E6000C Mini-OTDR User's Guide, E0302
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Copy: Copy the currently selected file(s). When you select
this option, you may choose a new directory or a different
device.
If no file is selected, this option is grayed.
Print: Print the currently selected file(s).
You must have a printer connected to the Mini-OTDR. For
more information, see "How to Print the Measurement" on
page 100.
If no file is selected, this option is grayed.
You may only print traces. Traces usually have the
extension .SOR, .TRC, or .TPL.
Device: Select a device from I
SR C , and F D
AM ARD LASH ISK
of the File Utilities screen correspond to the current
device.
Before you select F
LOPPY
must insert a floppy disk, an SRAM Card, or a Flash Disk
as appropriate.
See "Inserting and Removing a Floppy Disk, Flash Disk, or
SRAM Card" on page 72 for details.
Format: Format a device. You may choose between
Internal, Flash Disk, SRamCard and Floppy.
Please note that the Mini-OTDR cannot perform a "low-
level format" (one which involves creating a new file
system) on a floppy disk. This means that you cannot
format a completely unformatted floppy disk with your
Mini-OTDR. This must be done on a PC.
The format function on your Mini-OTDR is similar to the
"Quick Format" function on a PC.
Formatting a device will destroy all data on the device.
1 Getting Started
, F ,
NTERNAL LOPPY
. The files displayed at the left
, SR C , or F D
AM ARD LASH ISK
, you
61