Special Functions - ProLights TRIBE MINIRUBY User Manual

3.17 SPECIAL FUNCTIONS

For the MINIRUBY you can access the following special functions:
No Signal
Select this feature to set the preferred mode of operation to be activated in case the drive is not present
no DMX signal input:
• Press the MODE/ESC button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select UI Set, and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select No Signal and press ENTER to con-
firm.
• Press the UP/DOWN button to select the preferred mode of operation: Close/Hold/Auto/Music.
• Press the ENTER button to confirm your choice.
• Press the MODE/ESC button repeatedly to exit the menu and save changes.
Fans Mode
Select this function to set the fans operation mode:
• Press the MODE/ESC button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select UI Set, and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, and then select Fans Mode and press ENTER to
confirm.
• Press the UP/DOWN button to select Auto Speed /High Speed , press the ENTER button to confirm your
choice.
• Press the MODE/ESC button repeatedly to exit the menu and save changes.
Hibernation
Select this function to activate the standby mode. This function will be activated automatically after a
period of inactivity, which is defined by the user. In standby mode, the lamp and all engines will not be
fed if no signal is sent. The unit will automatically reset and will return to operation as soon as the DMX
signal is sent.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select the Set icon, then press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select UI Set, and press the ENTER button to
enter the next menu.
• Press the UP/DOWN to scroll through the menu, select Hibernation and press ENTER to confirm.
• Select the desired time through the arrow keys or select Not Hibernation to disable this function, then
press the ENTER button to confirm your choice.
• Press the MODE/ESC button repeatedly to exit the menu and save changes.
Fixture ID and RDM
With this function you can call up various submenus via RDM.
This device is RDM ready. RDM stands for "Remote Device Management" and makes remote control of
devices connected to the DMX-bus possible. Manual settings like adjusting the DMX starting address are
no longer needed. This is especially useful when the device is installed in a remote area. RDM is integrated
MINIRUBY
17