16
3.14 DISPLAY SETTINGS
You can change the following parameters related to the display, following the same procedure:
• Press the MODE/ESC button to access the main menu.
• Press the UP / DOWN keys to scroll the menu, select the Setup icon, then press the ENTER button to
enter the next menu.
• Press UP / DOWN to scroll through the menu, then select UI Set, and press the ENTER button to enter
the next menu.
• Press UP / DOWN to scroll through the menu, and then select one of the following settings for the dis-
play and press the ENTER key to display it.
- Back Light - Backlight display Auto Off. This feature allows you to automatically turn off the backlight
after a specified time that you can set using the arrow buttons. To have the display always on select
Always On or set a value of 01-99 min to turn off the display after the amount of time you choose.
- Flip Display - Orientation of the display. This function allows you to rotate the display 180° to get a
better view of the display when the unit is hanging upside down. Select ON to activate or OFF to
disable this function.
- MIC SENSITIVITY - Microphone sensitivity. Select this function to set the microphone sensitivity (0-99%)
for control via music mode. The default value is set to 70%.
- In TEMPERATURE C/F mode you can set temperature unit: use UP/DOWN button to select Celsius degree/
Fahrenheit degree.
• Press the ENTER button to confirm your choice.
• Press the MODE/ESC button repeatedly to exit the menu and save changes.
•
3.15 FIXTURE INFORMATION
To view all the information on the device, proceed as follows:
• Press the MODE/ESC button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the icon Information, then press the ENTER but-
ton to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select one of the following information
and press the ENTER button to display it.
- Lamp Temperature - Through the Temperature function can be displayed the temperature inside the
fixture, near the lamp. The temperature can be displayed in degrees Celsius or Fahrenheit.
• Press the MODE/ESC button repeatedly to exit the menu.
3.16 RESET FUNCTIONS
You can start a preset program to restore the selected function:
• Press the MODE/ESC button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select Reset and press the ENTER button to
confirm your choice and wait for the recovery of the selected function.
MINIRUBY