Summary of Contents for ProLights ECLIPSEFRESNELJTW
Page 1
ECLIPSEFRESNELJTW LED FRESNEL PROIECTOR USER MANUAL MANUALE UTENTE EN - IT...
Page 2
All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be reproduced in any form or by any means for any commercial use. In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the characteristics stated in this instruction manual at any time and without prior notice.
3. 14 Connection of the DMX line 3. 15 Construction of the DMX termination 3. 16 Channels DMX 4 Maintenance 4. 1 Maintenance and cleaning the unit 4. 2 Fuse replacement 4. 3 Trouble shooting Packing content • ECLIPSEFRESNELJTW • Power cable • User manual...
ECLIPSEFRESNELJTW WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future reference. It contains important information about the installation, usage and maintenance of the unit. SAFETY General instruction • The products referred to in this manual conform to the European Community Directives and are there- fore marked with .
- 1 - INTRODUCTION 1.1 DESCRIPTION ECLIPSEFRESNELJTW is an advanced LED replacement of traditional 650W Fresnel lamps, featuring 6 colour mixing delivering high precision reproduction of the white spectrum from 2.800K to 10.000K with high CRI and an extensive colour reproduction.
Page 6
ECLIPSEFRESNELJTW • RDM: RDM ready for fixture remote monitor and settings • Display: black OLED high resolution display • Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included • Other: 16bit control of dimmer and colour ELECTRONICS • Dimmer: linear 0 ~ 100% electronic dimmer •...
ECLIPSEFRESNELJTW 1.3 OPERATING ELEMENTS AND CONNECTIONS 12 13 Fig.2 1. AIR OPENING 2. LOCKING KNOB for mounting bracket 3. MOUNTING BRACKET 4. TRACK-ADAPTER(optional) 5. HANDLE 6. CONTROL PANEL with display and 4 button used to access the control panel functions and manage them 7.
ECLIPSEFRESNELJTW 1.4 ECLFRSJBP4 Battery pack kit for EclipseFresnelJ series, composed by ABS case, 4 pcs battery, 1 pc charger, 4 pcs male- male cable and 4 pcs male-female cables. BATTERY TECHNICAL SPECIFICATIONS • Estimated battery life in single colour mode up to: (R) 8 h - (G) 8 h - (B) 7 h - (L) 3 h - (O) 4 h - (RB) 7h •...
Page 9
ECLIPSEFRESNELJTW MOUNTING Holes DMX cable male-female Fig.5 IMPORTANT: do not connect this charger directly to the ECLIPSEFESNELJ, please connect this charger only with the battery as power charger. DMX cable male-male CORRECT WRONG Fig.6...
- 2 - INSTALLATION 2.1 MOUNTING ECLIPSEFRESNELJTW may be set up on a solid and even surface. The unit can also be mounted upside down to a cross arm. For fixing, stable mounting clips are required. The mounting place must be of suffi- cient stability and be able to support a weight of 10 times of the unit’s weight.
ECLIPSEFRESNELJTW - 3 - FUNCTIONS AND SETTINGS 3.1 OPERATION Connect the supplied main cable to a socket (100-240 VAC-50/60 Hz). Then the unit is ready for operation and can be operated via a DMX controller or it independently performs its show program in succession.
ECLIPSEFRESNELJTW 3.3 MENU STRUCTURE MENU ð ð CONNECT DMX Address Value (001-512) Default: 001 ð ð DMX Mode Amber Shift on ð Color CTO 2800 - 10000K Default: 2800K Temperature Hue (025~025) ð Color Picker 3200K Default: 3200K ð Customization...
Page 13
ECLIPSEFRESNELJTW ð ð ADVANCED Full On Mode Default: Studio Studio ð Dimmer Mode Default: Off Dimmer 1 Dimmer 2 Dimmer 3 ð White Balance ð Adjust Red (125~255) Default: Off Orange (125~255) Green (125~255) Royal Blue (125~255) Blue (125~255) Lime (125~255) ð...
• Press the MENU button to go back or to meet the waiting time to exit the setup menu. To operate the ECLIPSEFRESNELJTW with a light controller, adjust the DMX start address for the first a DMX channel. For example, If the controller is provided with to command the function of the first DMX channel, adjust the start address 33 on the ECLIPSEFRESNELJTW.
ECLIPSEFRESNELJTW 3.5 DMX CONFIGURATION ECLIPSEFRESNELJTW has several DMX channel configurations that can be accessed from the control panel. • Press the button MENU so many times until the display shows Connect, then select throught the buttons UP/DOWN DMX Channel, then press the button ENTER.
• Press UP/DOWN and select the Master/Slave mode to set the unit as master or slave (Master, Slave). • Use the ECLIPSEFRESNELJTW DMX connectors and an XLR cable to form a drive chain. In certain condi- tions and lengths, it is recommended to terminate as shown on page 18.
ECLIPSEFRESNELJTW 3.13 MANUAL MODE To set the customized balance of red, orange, green, royal blue, blue and lime colors, refer to the following procedure: • Press the button MENU so many times until the display shows Stand Alone, then select throught the buttons UP/DOWN Static, then press the button ENTER.
ECLIPSEFRESNELJTW 3.14 CONNECTION OF THE DMX LINE DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped- ance and low capacity. The following diagram shows the connection mode: DMX - INPUT DMX - OUTPUT XLR plug XLR socket...
ECLIPSEFRESNELJTW - 4 - MAINTENANCE 4.1 MAINTENANCE AND CLEANING THE UNIT • Make sure the area below the installation place is free from unwanted persons during setup. • Switch off the unit, unplug the main cable and wait until the unit has cooled down.
ECLIPSEFRESNELJTW 4.3 TROUBLESHOOTING Problems Possible causes Checks and remedies No mains supply Check the power supply voltage • • Dimmer fader set to 0 Increase the value of the dimmer channels Fixture does not light up • • Faulty LED Replace the LED board •...
Page 30
Music & Lights S.r.l. si riserva ogni diritto di elaborazione in qualsiasi forma delle presenti istruzioni per l’uso. La riproduzione - anche parziale - per propri scopi commerciali è vietata. Al fine di migliorare la qualità dei prodotti, la Music&Lights S.r.l. si riserva la facoltà di modificare, in qualunque momento e senza preavviso, le specifiche menzionate nel presente manuale di istruzioni.
Page 31
3. 15 Costruzione del terminatore DMX 3. 16 Canali DMX 4 Manutenzione 4. 1 Manutenzione e pulizia del sistema ottico 4. 2 Sostituzione fusibile 4. 3 Risoluzione dei problemi Contenuto dell'imballo: • ECLIPSEFRESNELJTW • Cavo di alimentazione • Manuale utente...
ECLIPSEFRESNELJTW ATTENZIONE! Prima di effettuare qualsiasi operazione con l’unità, leggere con attenzione questo manuale e conservarlo accuratamente per riferimenti futuri. Contiene informazioni importanti riguardo l’installazione, l’uso e la manutenzione dell’unità. SICUREZZA Avvertenze generali • I prodotti a cui questo manuale si riferisce sono conformi alle Direttive della Comunità Europea e per- tanto recano la sigla .
ECLIPSEFRESNELJTW - 1 - INTRODUZIONE 1.1 DESCRIZIONE ECLIPSEFRESNELJTW è fresnel fascia alta, equivalente proietto- ri alogeni da 650W. La specifica sorgente a 6 colori ci permette di riprodurre qualsiasi tonali- tà colore e coprire interamento lo spettro del bianco, da 2.800K a 10.000K con un elevato CRI.
Page 34
ECLIPSEFRESNELJTW • Display: display black OLED ad alta risoluzione • Aggiornamento firmware: si, con interfaccia USB - DMX (UPBOX1) non inclusa • Altro: 16bit control of dimmer and Color ELETTRONICA • Dimmer: 0 ~ 100% lineare, elettronico • Curve dimmer: 4 curve dimmer regolabili •...
ECLIPSEFRESNELJTW 1.3 ELEMENTI DI COMANDO E COLLEGAMENTI 12 13 Fig.2 1. PRESA DI VENTILAZIONE apertura per uscita flus- so d'aria da non ostruire. 2. VITE DI FISSAGGIO SAGOMATORE 3. BRACCIO GIREVOLE 4. STAFFA DI MONTAGGIO 5. MANIGLIE 6. PANNELLO DI CONTROLLO con display e 4 pul- sante per accesso e gestione delle funzioni.
Page 36
ECLIPSEFRESNELJTW 1.4 ECLFRSJBP4 ECLFRSJBP4 è una robusta custodia ABS con quattro batterie, un caricabatterie, quattro cavi DMX ma- schio-maschio, quattro cavi DMX maschio-femmina all’interno. SPECIFICHE TECHNICHE BATTERIA • Autonomia in modalità singolo colori, fino a: (R) 8 h - (G) 8 h - (B) 7 h - (L) 3 h - (O) 4 h - (RB) 7h •...
ECLIPSEFRESNELJTW MONTAGGIO Fori Cavo MX maschio-femmina Fig.5 IMPORTANTE: non collegare il caricabatteria direttamente all’ECLIPSEFRESNELJ, collegare questo carica- batteria solo con la batteria. Cavo MX maschio-maschio CORRETTO ERRATO Fig.6...
Page 38
- 2 - INSTALLAZIONE 2.1 MONTAGGIO L’ ECLIPSEFRESNELJTW può essere collocato su un piano solido. Inoltre, grazie alle possibilità di fissaggio sulla staffa (fig.3), l’unità può essere montata anche a testa in giù, su una traversa. Per il fissaggio occorrono dei supporti robusti per il montaggio.
- 3 - FUNZIONI E IMPOSTAZIONI 3.1 FUNZIONAMENTO Per accendere l’ ECLIPSEFRESNELJTW, inserire la spina del cavo di alimentazione in una presa di rete (100-240V~/50-60Hz). L’unità può essere comandata da un unità DMX di comando luce oppure svolgere autonomamente il suo programma. Per spegnere l’ ECLIPSEFRESNELJTW, staccare la spina dalla presa di rete.
ECLIPSEFRESNELJTW 3.3 STRUTTURA MENU MENU ð ð CONNECT DMX Address Value (001-512) Default: 001 ð ð DMX Mode Amber Shift on ð Color CTO 2800 - 10000K Default: 2800K Temperature Hue (025~025) ð Color Picker 3200K Default: 3200K ð Customization...
Page 41
ECLIPSEFRESNELJTW ð ð ADVANCED Full On Mode Default: Studio Studio ð Dimmer Mode Default: Off Dimmer 1 Dimmer 2 Dimmer 3 ð White Balance ð Adjust Red (125~255) Default: Off Orange (125~255) Green (125~255) Royal Blue (125~255) Blue (125~255) Lime (125~255) ð...
DMX per il primo canale DMX. Se, per esempio, sull’unità di comando è previsto l’indirizzo 33 per comandare la funzione del primo canale DMX, si deve impostare sull’ ECLIPSEFRESNELJTW l’indirizzo di start 33. Le altre funzioni del pannello saranno assegnate automaticamente agli indirizzi successivi.
ECLIPSEFRESNELJTW 3. 5 CONFIGURAZIONE CANALI DMX L’ ECLIPSEFRESNELJTW dispone di diverse configurazioni dei canali DMX a cui si può accedere dal pannello di controllo. • Premere il tasto MENU fino a quando sul display non appare Connect, dopodichè selezionare attraverso i tasti UP/DOWN DMX Channel, quindi premere il tasto ENTER.
Premere il tasto ENTER per confermare. • Servirsi dei connettori DMX dell’ ECLIPSEFRESNELJTW e di un cavo XLR per formare una catena di unità. In certe condizioni e lunghezze si consiglia di effettuare una terminazione come mostrato a pagina 20.
ECLIPSEFRESNELJTW 3.12 MODALITÀ STATIC L’unità consente di creare delle configurazioni che possono essere impostate attraverso la seguente pro- cedura: • Premere il tasto MENU per accedere al menu principale. • Premere il tasto UP/DOWN per selezionare Stand Alone, quindi premere il tasto ENTER per confermare.
ECLIPSEFRESNELJTW 3.14 COLLEGAMENTI DELLA LINEA DMX La connessione DMX è realizzata con connettori standard XLR. Utilizzare cavi schermati, 2 poli ritorti, con impedenza 120Ω e bassa capacità. Per il collegamento fare riferimento allo schema di connessione riportato di seguito: DMX - INPUT...
Page 54
ECLIPSEFRESNELJTW 21 CHANNELS 21 CHANNELS MODE MODE FUNCTION FUNCTION Value Value 21 Ch 21 Ch DIMMER RED FINE 0~100% 000 - 255 0~100% 000 - 255 DIMMER FINE ORANGE 0~100% 000 - 255 0~100% 000 - 255 ORANGE FINE STROBE...
Page 55
ECLIPSEFRESNELJTW - 4 - MANUTENZIONE 4.1 MANUTENZIONE E PULIZIA DEL SISTEMA OTTICO • Durante gli interventi, assicurarsi che l’area sotto il luogo di installazione sia libera da personale non qualificato. • Spegnere l’unità, scollegare il cavo di alimentazione ed aspettare finché l’unità non si sia raffreddata.
Page 56
ECLIPSEFRESNELJTW 4.3 RISOLUZIONE DEI PROBLEMI Anomalie Possibili cause Controlli e rimedi Mancanza di alimentazione di rete Verificare la presenza della tensione alimentazione • • Dimmer impostato a 0 Incrementare i valori del canale dimmer Il proiettore non illumina • •...