Sensitivity Microphone; Linking; Dmx Configuration; Dmx Addressing - ProLights TRIBE MINIRUBY User Manual

• Press the ENTER button to confirm your choice.
• Press the MODE/ESC button repeatedly to exit the menu and save changes.
The unit will go into automatic mode by executing the program automatically.
Music mode - [MUSIC CONTROL] -
• In MUSIC CONTROL mode, via its integrated microphone, the unit can be controlled by music with a
clear rhythm in the bass range. If the music control should not work optimally, increase the volume
or reduce the distance between the sound source and the light effect unit.
• Use UP/DOWN button to select Master - Alone - .
• Press ENTER button to confirm the selection.

3.5 SENSITIVITY MICROPHONE

Select this function to set the value of the sensitivity of the microphone for use with a music control:
• Press the MODE button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select UI Set, and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select Mic Sens. and press ENTER to confirm.
• Press the UP/DOWN button to adjust the level of sensitivity of the microphone, and then press the
ENTER button to confirm your choice.
• Press the MODE button repeatedly to exit the menu and save changes.

3.6 LINKING

Several units may be interconnected in order to control all further slave units to the same effect of the
master unit.
5. Connect the DMX OUT of the master unit via 3/5-pole XLR cable to the DMX IN of the first slave unit.
6. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.

3.7 DMX CONFIGURATION

The MINIRUBY has 5 DMX channel configurations which can be accessed from the control panel.
• Press the MODE button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select Users and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select User Mode and press ENTER to confirm
your choice.
• Use the UP/DOWN button to select the desired DMX channel configuration (Standard, Basic), then press
the ENTER button to confirm your choice.
• Press the MODE button repeatedly to exit the menu and save changes.

3.8 DMX ADDRESSING

For operation via light control unit with DMX512 protocol, is sufficient connect the controller to MINIRUBY.
To able to operate the MINIRUBY with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX chan-
nel, adjust the start address 33 on the MINIRUBY. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
MINIRUBY
11