ProLights TRIBE MINIRUBY User Manual page 31

The MINIRUBY may be set up on a solid and even surface. By means of the fixing facilities of the baseplate,
the unit can also be mounted upside down to a cross arm. For fixing, stable mounting clips are required.
According to the figure, the bolts of the brackets are placed into the openings provided in the base plate
and turned clockwise until they lock (to the stop). Always ensure that the unit is firmly fixed to avoid vibra-
tion and slipping while operating.
The mounting place must be of sufficient stability and be able to support a weight of 10 times of the unit's
weight. When carrying out any installation, always comply scrupulously with all the regulations (particu-
larly regarding safety) currently in force in the country in which the fixture's being used. Always addition-
ally secure the projector with the safety rope from falling down. For this purpose, fasten the safety rope at
a suitable position so that the maximum fall of the projector will be 20 cm.
MINIRUBY
CLAMP
SAFETY
CABLE
7
Fig.4