Fixture Settings; Lamp Settings - ProLights TRIBE MINIRUBY User Manual

3.12 FIXTURE SETTINGS

You can change the parameters for the device by following these steps:
• Press the MODE/ESC button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, then select Movement and press the ENTER but-
ton to enter the next menu.
• Use the UP/DOWN button to select the option proposed and press the ENTER button to confirm the
setting.
- Pan Reverse - Pan rotation in the opposite direction. Select OFF to deactivate the function (normal
setting); ON to activate the function (Pan Reverse).
- Tilt Reverse - Used for reversing tilt movement. Select OFF to deactivate the function (normal setting);
ON to activate the function (Tilt Reverse).
- Pan Degree - Angle of Pan. Select 540° or 630° to set the maximum angle of rotation of the moving
head.
- Encoders - Reorganization Pan/Tilt position after rolling away. Select OFF to deactivate or ON to ac-
tivate the function.
- MOVE Mode - Type of movement of the moving head. Select Standard to obtain a fast and fluid move-
ment of Pan/Tilt, Smooth for a slower and softer movement of Pan/Tilt.
• Press the ENTER button to confirm your choice.
• Press the MODE/ESC button repeatedly to exit the menu and save changes.

3.13 LAMP SETTINGS

You can change the parameters of the device lamp by following these steps:
• Press the MODE/ESC button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Lights icon, then press the ENTER button to
enter the next menu.
• Press UP/DOWN to scroll through the menu, select one of the following settings and press the ENTER
button to display it.
- Turn On/Off - Turn on/off the lamp. Select On/Off, press ENTER button to confirm, present mode will
blink on the display, use UP/DOWN button to select On (lamp on) or Off (lamp off ), press ENTER
button to store.
- Automatic - Lamp state while power on. Use UP/DOWN button to select On (Lamp on while power
on) or Off (Lamp off while power on), press ENTER button to store.
- DMX Control - Turn off the unit via DMX controller. Use UP/DOWN button to select Off (turn off the
unit via DMX controller available) or On (turn off the unit via DMX controller impracticable), press
ENTER button to store.
- Max Temperature - Temperature operating limits. This function allows you to set the maximum tem-
perature inside the projector, after which the lamp will automatically turn off. Press the arrow but-
tons to set the desired temperature (80° -139°). Temperatures of less than 90° C are not critical. We
recommend that you enable this feature for temperatures higher than 90°.
- Lamp Adjust - Adjusts the lamp. This function allows you to modify all the parameters of the lamp:
Control, Pan, Pan Fine, Tilt, Tilt Fine, Pan&Tilt Speed, Shutter, Color, Prism. Press the UP/DOWN button to
select one of the parameters and press ENTER to edit the value (000-255) through the UP/DOWN
button.
• Press the ENTER button to confirm your choice.
• Press the MODE/ESC button repeatedly to exit the menu and save changes.
MINIRUBY
15