Orcon HRC-EcoMax Series Installation Manual page 5

2.3 Scope of delivery
Before installing the HRC, check that it has been delivered complete and undamaged.
It is complete if the following parts are included:
• HRC-EcoMax or HRC-MaxComfort with 230V earthed power cord
• Wall bracket
• Mounting set with 2x M8 bolts, 2x M8 washers and 2x plugs
• Installation manual
• User manual
• Connector piece 32mm / G1¼" for condensation drain
• 2x Orcon Filter (already in unit) (depending on unit model, see Chapter 2.2)
• Optional preheater (depending on unit model, see Chapter 2.2)
2.4 Optional accessories
Item
HRC chassis
Preheater
EFF ø125 Extractor valve
EFF ø160 Extractor valve
TFF ø125 Supply valve
TFF ø160 Supply valve
Dry condensation drain set
Filter set HRC 2x coarse 65%
Filter set HRC coarse 65% & ePM1 70%
Perilex power cord
CV-3 Perilex socket - surface mounted
CV-3 Perilex power socket - built-in
Remote control 15RF
CO Roomsensor 15RF
2
CO Controlsensor 15RF
2
2.5 Scope of application
The unit is only suitable for residential buildings and not for industrial use, swimming
pools or saunas. The air flow rate from the unit must match the ventilation requirements
of the home.
Article number
22700080
29190550
23121002
23121003
23121012
23121013
22700065
22700002
22700006
22915405
28000005
28000000
21800000
21800040
21800045
index
5