Orcon HRC-EcoMax Series Installation Manual page 15

4.5 Installing the unit
Wall mounting
The unit can be hung on the supplied wall bracket. But only if the wall has a minimum
2
mass of 200 kg/m
1. Attach the wall bracket to the wall using the bolts and plugs supplied. Caution:
mount the wall bracket using a spirit level before you connect the ducts!
Sufficient space must be left underneath the wall bracket for the condensation
extractor (see chapter 4.7).
2. Place the HRC in the left or right configuration over the wall bracket, by hooking
the hook on the back of the unit over the wall bracket.
3. Turn the levelling feet on the back of the unit so that it hangs level against the
wall. This ensures that the condensation extractor works optimally.
Transformer
Menu
button
is available.
Add-on PCB
index
15