Mac 5500 St Requirements And Configuration; Blood Pressure Units - GE MAC 5500 Service Manual

MAC 5500 ST Requirements and Configuration

The following sections describe the connection and configuration requirements for
select external devices that are compatible with the MAC 5500 ST option. The devices
are grouped according to device type.

• Blood pressure units

• Treadmills
• Bicycle ergometers
Blood Pressure Units
The MAC 5500 device is compatible with the following blood pressure units.
Colin — Model ST-780
Connection Requirements
• Connect the MAC 5500 port 1 to the Colin serial port.
The customer is responsible for providing the necessary cabling. Refer to
(COM3/4) Pins (J3)" on page 79
• Connect the MAC 5500 ANA/TTL port to the Colin QRS trigger input.
The customer is responsible for providing the necessary cabling. Refer to
Pins (J6)" on page 80
Device Configuration
None.
MAC 5500 Configuration
At the MAC 5500 Main Menu, complete the following:
1. Select System Setup.
2. Enter System Password.
3. Select Exercise Test > Inputs/Outputs.
4. Change Blood Pressure to Nipon-Colin.
Sun Tech — Model Tango
Connection Requirements
• Connect the MAC 5500 port 1 to the Sun Tech serial port.
The customer is responsible for providing the necessary cabling. Refer to
(COM3/4) Pins (J3)" on page 79
• Connect the MAC 5500 ANA/TTL port to the Sun Tech QRS trigger input.
The customer is responsible for providing the necessary cabling. Refer to
Pins (J6)" on page 80
Device Configuration
At the Tango Main Menu, complete the following:
1. Select Utilities > Device.
2. Scroll to ECG Trigger and press Enter.
3. Scroll to DIGITAL
2046275-017G
for details on cable wiring.
for details on cable wiring.
for details on cable wiring.
for details on cable wiring.
á á á
and press Enter.
MAC™ 5500/MAC™ 5500 HD
Installation
"COM1
"Analog
"COM1
"Analog
47