Table of Contents
Advertisement
3.1.2
Mains adapter
Mains adapter for supplying the Connect Box via a Micro-USB cable.
3.1.3
Interface converter
Interface converter between sauna unit FCUxxxx and Connect Box.
3.1.4
USB cable
USB cable (3m) for connection between Connect Box and interface converter.
3.2
Connection and initial operation
Connection and initial operation of the individual components:
1.
2.
3.
4.
5.
3.3
Initial set-up with LAN operation
The Connect Box automatically connects to the cloud server when there is an Internet
connection. No further set-up is necessary. If successfully connected to the cloud serv-
er, the FCU will give 3 beeps as feedback.
You can connect directly to the sauna via the App.
Installation and Operating Manual / Version V 1.02
Connection and initial set-up by service technician
Please insert the interface converter in the FCU control.
Connect the interface converter to the FCU slot "FB-BUS".
Please connect the Connect Box to the interface converter via the USB port. USB
port may not be changed during operation. If this happens, the Connect Box must
be restarted.
Only for LAN operation:
Connect the LAN cable from the Connect Box to your in-house network (LAN). This
connection can be made to a router or network switch.
Only for WLAN operation:
Ensure that you have stable WLAN reception.
If necessary, the WLAN antenna can be rotated 360° after loosening the nut. En-
sure that you tighten the nut firmly afterwards.
Please connect the USB mains adapter to the Connect Box. The Connect Box
starts automatically after it has been plugged in.
Setting up the Connect Box.
NOTE!
Please note that a DHCP server must be enabled in the in-house LAN.
In most cases, this function is performed by the connected router (or, in
some company networks, by a corresponding network server).
13
Advertisement
Table of Contents
