Table of Contents
Advertisement
No.
Fault
800
Drying did not end
correctly.
999
Internal time error
Table 9: Error messages
8.5
Acknowledge error message
1.
2.
Decommissioning and disposal
9
10 General
10.1
Limitation on liability
All the specifications and directions in this manual have been prepared based on the
statutory standards and regulations, the present state of technology, as well as our
many years of knowledge and experience.
The manufacturer is not responsible for damage due to:
The actual delivery package can deviate from the given descriptions and illustrations in
case of special designs, additional orders or due to latest technical changes.
Installation and Operating Manual / Version V 1.02
Possible causes
Drying temperature
was not reached, pro-
gram cancellation by
the user or error
Internal time error
Eliminate the cause of the error.
-Press the key for approx. 2 seconds. Message disappears.
Do not dispose of the sauna control unit with regular garbage.
Dispose the control system in accordance with the respective country-specific
regulations.
Non-adherence to the operating and installation instructions
Non-intended use
Unauthorised alterations
Technical changes
Use of own installation tools (only the provided installation tools are permitted)
Use of non-licensed spare and wear parts.
Decommissioning and disposal
Troubleshooting
the service engineer if the er-
ror occurs again.
Execute the drying program or
acknowledge the error. Start
the sauna program if the cabin
is damp.
To be carried
out by
neer
User
Service engi-
neer
29
Advertisement
Table of Contents
