Maintenance; Faults; Safety - Fasel Elektronik FCU6x00 Series Installation And Operating Manual

Sauna control units
Table of Contents

Advertisement

Maintenance

Maintenance
7
The sauna control units are maintenance-free.
Cleaning
Aggressive
cleaning agents
and media
1.
2.

Faults

8
8.1

Safety

General
26
WARNING!
Device damage possible!
Aggressive cleaning agents and media can damage or destroy compo-
nents or electric cables.
For this reason:
– Do not use any cleaning agents or media with aggressive substances.
Turn off the control unit and secure it against being switched on again (switch off
the automatic circuit breakers.)
Clean the housing only from outside using a damp soft cloth. The housing must not
be opened.
WARNING!
Risk of injury due to improper troubleshooting!
Improper troubleshooting can result in serious injuries or even death.
For this reason:
– In case of faults, switch off the control unit, disconnect it from the mains
and secure against restarting. Contact customer service.
– Repair work must be carried out only by qualified personnel, unless oth-
erwise specified.
– Before starting work make sure there is sufficient space for the installa-
tion.
– Pay attention to order and cleanliness at the place of installation. Loose
components and tools lying around or on top of each other are safety
hazards.
– If parts are to be replaced: Ensure correct installation of spare parts. In-
stall all fastening elements properly again. Only use original spare parts.
– Ensure that all covers are properly installed before restarting.
WARNING!
If there is a short-circuit in a 230V/400V load, the contact of a relay can
fuse due to the high short-circuit current. This can lead to steady state of
the consumer. Switch off the automatic circuit breaker in the junction box.
Contact customer service.
Installation and Operating Manual / Version V 1.02

Advertisement

Table of Contents
loading

Table of Contents