Unplugging - Meridian TITAN SR2 Operator's Manual

6. Engage the trolley lock plates and the
transport lock before transporting the tender.

10.9 UNPLUGGING

IMPORTANT
Do not operate the conveyor or auger when it
is plugged with excess seed or is hindered from
moving by a foreign object. Continued operation
can cause damage to the conveyor or result in a
broken conveyor belt.
Do not place hands or
fingers near rotating or
moving parts.
46
If the conveyor or auger becomes plugged, follow
this procedure:
1. Close the slide gate.
2. Position the conveyor or auger with easy
access to both ends.
3. Stop the engine and remove the ignition key.
Place a lock-out tag on the control box to
prevent accidental starting of the conveyor or
auger.
4. Open the lower access door at the bottom of
the conveyor and remove any excess seed
or obstruction. If equipped with an auger,
remove any excess seed or obstruction
through the opening in the top of the auger
tube.
5. Close and secure the lower access door.
19936