Transferring Seed To Planter - Meridian TITAN SR2 Operator's Manual

WARNING
CRUSH HAZARD
Do not remove the lifting device until
you are sure the seed box and trailer
are stable.
7. Make sure the seed box is loaded properly
onto the unit.
8. Make sure the rubber boot contacts the
bottom of the seed box.
9. Close both seed box lock-down arms. Insert
the retaining pins and lock them in place.
32
WARNING
CRUSH HAZARD
Make sure the retainer pins are
securely locked to keep the seed box
attached to the unit.
10. Open the seed box gate valve.
8.3 TRANSFERRING SEED TO
PLANTER
This section provides a step-by-step procedure for
loading seed into the planter from the tender.
1. Position the seed tender near the planter.
2. Before unloading, shut off the engine of the
tow vehicle, set the parking brake, remove the
ignition key, and wait for all moving parts to
stop before leaving the cab.
3. Check the surrounding area for overhead
power lines that could contact the conveyor.
Contact with electricity can result in
serious personal injury or death.
WARNING
ELECTROCUTION HAZARD
Avoid contact with overhead
power lines or electrically
powered objects.
1. Be aware of your
surroundings when raising
or lowering any part of the
equipment.
2. Maintain at least 20 feet between the
equipment and any electrical hazard.
3. Contact with electricity can result in serious
personal injury or death.