Talc Applicator; Unplugging Conveyor - Meridian TITAN SR2 Operator's Manual

8.4 TALC APPLICATOR

For tenders equipped with the optional talc
applicator, follow this procedure.
1. Fill the hopper with talc.
2. Switch the system on at the control box. Use
theknobtosetthedesiredflowrate.
3. The application is controlled from the switch
on the discharge spout. The indicator light
illuminates when talc is being dispensed.

8.5 UNPLUGGING CONVEYOR

If the conveyor plugs, follow the procedure in
"10.9 Unplugging" on page 46.
Do not place hands or
fingers near rotating or
moving parts.
19936
37